Hello guys
I have been working for 6 mouths on my new casemod project umbrella corp case.
I wanted to make a mod with a new idea to make the motherbord harddisk and power
supply turn a 360 degrees so you can see the hole motherbord like a expensive
work of art.
I use this case as a normal computer or as wireless vpn server it was al lot of work making it spinnig.
System
cpu P4 3 GHz
mobo asus P4S800
Ram 1.5 GB
hd Maxtor 40 GB
usb wifi stick
vc GF MX400 64 MB DDR TV
Worklog
The case
This is the first design of the project
Making the umbrella logo
First i used a router to make a circle
I used the router for making the circle look like a umbrella form from above
This is the umbrella made from plywood
The next step is making an inner cirkel and using the router te make place for the fluorescent lamp
the plywood pattern is ready i used this to make all the lexan 12 plates the same as the pattern
Attachment not found
The 2 fluorescent lamps witch lights the 2 umbrella logo,s
I attached the peace to the middel of the logo so that the shaft could fit through
The first setup of the system testing if it works
The steal frame
Testing the case and light
The gear:
This one workt only 1 revolution because the plastic wasn't strong the next gear i used is made of steal and it is still running.
The dc motor
The dc motor i used was from a Battery dril
The steal frame for the system
Case at the back of the motherbord
What is left of the power supply
The harddisk
The side of the case
power light power switch small speaker reset switch
Cable management
Motherbord
The anti virus:
The making of the anti virus, first i used a plexi glass tube and added the light snake to it.
I glued it to the bottem and top of the tube then i attached the out side tube to it and the top
and bottem covers.
Speed controol
This speed controol didin't last for long the motor required more than 5 ampere and the speed controol
supplied only 5 ampere.
I bult a new one you wil see later.
bulding the case
It wasnt easy to do because the pipe had to fit through all the components and i had to connect the
power cables also.
I also made the frame smaller because it is easier to transport (lan party's)
Align the gears with the motor
Cutting the foil
Sticking the foil
The Barrel:
It was a soup barrel before i got my hands on it
After i fond some zombies they first wanted to eat me but after i showed them the case they wanted to help me out so this is the result.
I also edit a fan for cooling the motor.
The case
The speedcontrol
Inside the speedcontrol
light,siren for lanparty fun,battery,cordless drill switch
With some crew members at times lan hot summer 2010
The movie of the casemod
This is the movie my frends made at times lan hot 2010 Thanks!!!!!!!!!