Photos and Features

The Cooler Master MasterLiquid PL240 Flux box has a bright purple fading into black for its background, which isn’t too big of a surprise given that Cooler Master uses that purple often on their lineup. The front of the box is simple, but I really like everything they have going on. There is a picture of the cooler in the center which also has the fans and the pump lit up with their addressable RGB lighting. Then in the top right corner, they have the model name in a large and easy to read font. Then the Cooler Master logo is small and down in the bottom left corner. For the model name and for a few accents on the box they use a turquoise which is bright and goes perfectly with the purple. They have the AIO coolers specifications on the side of the box. Then for the back, they break down the controller included, the pump, and the fan to talk a little about each of their features which are then repeated multiple times in other languages.

image 10

 

image 11

 

image 12

 

Once you get inside the box, there is a sheet of foam that sits across the top of everything. Then under that, a cardboard tray formed to fit each component individually. Everything is wrapped up in plastic other than the accessories which are all in a cardboard box.

image 13

 

So the MasterLiquid Flux kit is available in the PL240 that I am checking out here and a PL360 kit, both are 120mm fan kits with one having two fans and the other three fans. The includes fans are a new PL-Flux fan series which have been redesigned now with a new interconnected blade design that helps add more structure and strength to give the blades more stability at high speeds. I was surprised with the overall quality feel of these fans. The housing feels more solid than your average AIO cooler kit fan. They have rubber anti-vibration mounts on each corner on both sides. They run from zero to 2300 RPM with a max airflow according to Cooler Master specs at 72.37 CFM and a max pressure of 2.96 mmH20. They have a life expectancy of 160,000 or more hours and use loop dynamic bearings which are the same bearings that Cooler Master used on their Silencio fans. The blades are translucent white which helps transmit the addressable RGB lighting that they have built in the center section. They have the standard two cables, one for the 4-pin PWM fan control and the other for the 3-pin addressable RGB lighting cable, and both cables have a black sleeving on the outside. The side profile of the fans is interesting as well because the housing has a ribbed design.

image 14

 

image 15

 

image 16

 

image 17

 

The radiator for the MasterLiquid PL240 Flux is the standard boxy AIO radiator that we have been seeing on a lot of kits recently. I think these look a lot better than the older rounded end radiators but performance wise there isn’t anything that makes these stand out. Ours did come with a few dings and dents in the fins, but it also was a prelaunch kit. I like the textured black finish and on the edges, they also printed in a gloss black “designed by Cooler Master” which not a lot of companies can even say given that most stick with the standard AIO OEM. Overall it is 27.2mm thick and 277mm long and 119.6mm tall to fit the 120mm fans.

image 18

 

image 19

 

image 20

 

image 26

 

Then for what drives everything, the MasterLiquid PL240 Flux has a pump and water block combo. They use a dual-chamber design like all of the Cooler Master AIO kits. The pump itself has ceramic bearings which gives it an MTTF of over 210,000 hours. This helps with the MasterLiquid PL240 Flux’s overall warranty which is a healthy 5 years. The Cooler Master specs have the pump height at 40mm but our measurement looked closer to 39mm which isn’t low profile like some Asetek designs but isn’t bad at all considering that they do have to stick with dual-chamber designs and that includes leaving room for the built-in addressable RGB lighting. The RGB lighting is integrated into the mirrored top finish with the Cooler Master logo outline as well as a ring around the outside that is also visible on the sides. So I say the top of the pump has a mirror finish, but it is a machined metal finish that you can still see the circular machine marks in, and the finish is tinted for a cool style. The pump, like the fans, has two cables coming from it as well. One is a PWM fan header that powers the pump and controls its speed then the other is a 3-pin addressable RGB plug for the lighting.

image 21

 

image 22

 

image 23

 

image 24

 

image 25

 

So the MasterLiquid PL240 Flux does come with its own controller. I know some of the kits I have been seeing recently skip out on including their own lighting controller and I don’t blame them. They add complications and most importantly also mean you need to maintain software. Cooler Master was able to tie the MasterLiquid PL240 Flux in with their masterplus software which they already use for peripherals. This controller is only for the RGB lighting however, I know some other kits like from Corsair that like to bring the control of everything all together. You will still need to hook the fan and pump plugs into your motherboard. But for the lighting, you can plug everything in here. The controller has three RGB headers but they also include an adapter so that you can string the two fans and pump for the MasterLiquid PL240 Flux all together and only take up one of these plugs. They aren’t CM specific as well, so you can use the extra plugs to handle anything with a 3-pin addressable RGB connection. On the other side, the controller has a micro USB plug and a 2-pin power connection. The cables included give you power from a SATA plug and the USB runs on a USB 2.0 internal header. It has a light on top to let you know it is working as well as the Cooler Master logo outline. Then on the bottom, it has two rubber feet and room for double-sided sticky tape which you would think would be included but I didn’t see in our kit at all.

image 27

 

image 28

 

image 29

 

image 30

 

So for accessories included with the MasterLiquid PL240 Flux kit. You start with three bags of hardware for the installation with one of those having multiple bags inside. I like that each is labeled and you can see that you have bags for the Threadripper bracket and the AMD bracket. There are two back brackets, one for the older Intel sockets and then the other is for the new LGA 1700 Intel bracket. For documentation, there is a user manual and one warranty book. There is a bag of fan screws and even standoffs for the LGA 2011 socket. They include a very small tube of thermal paste and a fan cable splitter. I mentioned the power and USB cables for the controller earlier and the RGB cable that ties all of the RGB lighting all onto one loop. That cable comes with one extra plug for the larger 3 fan model as well. The small black clips in that same picture are unique in that they help lock those RGB connections together to prevent problems in the future.

image 31

 

image 32

 

image 33

 

image 34

 

image 35

 

Before installing the MasterLiquid PL240 Flux on to our test system I did get things ready by preinstalling a few components and I ran into a few interesting things along the way. The coolest feature that I think will go unnoticed by a lot of people are the thumbscrews that they used to install the fans. This isn’t the first time I’ve seen thumbscrews used for this. But it is amazing how much easier they make installing the 8 screws for the fans. But these have a second function. You can actually screw in screws to the ends. You can use this to mount the fan on the fan side without having to do the balancing the radiator and fans together trying to keep all of the holes lined up. It does mean that if you install things this way that there will be a gap and SFF builds wouldn’t be able to go this route. In fact with the thumb screws in general, if fitment is tight you don’t get a normal set of screws so that additional height needs to be kept in mind. I also really like the snap on clips that are included to lock the RGB lighting connections altogether. As a whole, I’m never a big fan of the wiring mess that RGB lighting adds, but at least with these, you don’t need to worry about the connections coming apart when fighting to hide all of that wiring.

image 36

 

image 37

 

image 38

 

image 39

 

image 40

 

 

Log in to comment

We have 1395 guests and one member online

supportus